B6-18:

Non-pen roof mount designed for a 3’(1m) antenna. The mount utilizes a post-tension concept to provide a strong, cost-effective mount. Mast diameters up to 3.5”OD and mast height 2’ max. for most installations.

A 6’X6’ non-pen roof mount designed for a 4’(1.2m) antenna. Mast diameters up to 3.5”OD and typical mast height of 3’ max. for most installations. The mount is also available with a 6’x8.6’ foot print, model B4-6x8.6.

Non-pen roof mount designed for a 4’(1.2m) antenna. The mount utilizes a post-tension concept to provide a strong, cost-effective mount. Mast diameters up to 3.5”OD and mast height 3’ max. for most installations.

A 10.9’x10.9’ non-pen roof mount designed for a 6’(1.8m) antenna. Mast diameters up to 6.62”OD and typical mast height of 3’ max. for most installations. The mount is also available with a 13.5’x13.5’ foot print, model B6-13.5.

A non-pen roof mount designed for a 6’(1.8m) antenna. The mount utilizes a post-tension concept and can hold from two to twelve 8”x8”x16” per leg.Mast diameters up to 6.62”OD and typical mast height of 3’ max. for most installations. A larger version the BPTS-6D is also available.

Non-pen mount designed for a 6’(1.8m) antenna & can handle an 8’(2.4m) antenna depending on the wind loading. Several ballast tray options or penetrating version available.

Drop legged version of the PS-10. Drop leg accommodates an offset antenna. Non-pen roof mount designed for a 6’(1.8m) antenna & can handle an 8’(2.4m) antenna depending on the wind loading.

Non-pen mount designed for a 8’(2.4m) antenna & can handle a 10’(3m) antenna depending on the wind loading. Several ballast tray options or penetrating version available.

Drop legged version of the VL-10. Drop leg accommodates an offset antenna. Non-pen roof mount designed for a 8’(2.4m) antenna & can handle an 10’(3m) antenna depending on the wind loading. Several ballast tray options or penetrating version available.

Non-pen mount designed to handle a 10’(3m) antenna. Several ballast tray options or penetrating version available.

Drop legged version of the PL-2. Drop leg accommodates an offset antenna. Non-pen roof mount designed to handle an 10’(3m) antenna. Several ballast tray options or penetrating version available.

Non-pen mount designed to handle most pipe mounted 12’(3.7m) antennas. Several ballast tray options or penetrating version available.

Heavy duty version of the PXL-2 non-pen mount designed to handle the 12.5’(3.8m) antennas. Several ballast tray options or penetrating version available. This mount is typically recommended for 3.8m Prodelin & 3.8m Comtech.

ExtraHeavy duty version of the PXL-2 non-pen mount. Several ballast tray options or penetrating version available.

A heavy duty non-pen mount designed to handle 4.5m antennas, larger antennas may be used after review by Baird. This mount is used in conjunction with an adapter kit to mount many brands of antenna kingposts & tripods. Available in four sizes and as a penetrating mount.

An extra heavy duty mount designed to handle 5m antennas, larger antennas may be used after review by Baird. This mount is used in conjunction with an adapter kit to mount many brands of antenna kingposts & tripods. Available in four sizes and as a penetrating mount.

Handles a 3’(1m) antenna. Mast diameters up to 3.5”OD and mast height 2’ max. for most installations. Mount adjusts from flat through 7/12 roof pitch.

Handles a 4’(1.2m) antenna. Mast diameters up to 3.5”OD and a mast height 2’ max. for most installations. Mount adjusts from flat through 7/12 roof pitch.

Handles up to 10’(3m) antenna. Mast diameters up to 6.62”OD and a mast height of 4’ max. for most installations. Mount adjusts from flat through 7/12 roof pitch.

Handles up to 10’(3m) antenna. Mast diameters up to 6.62”OD and a mast height of 5’ max. for most installations. Mount adjusts from flat through 6/12 roof pitch.

Handles up to 10’(3m) antenna. Mast diameters up to 6.62”OD and a mast height of 5’ max. for most installations. Mount adjusts from flat through 6/12 roof pitch.

Handles a 4’(1.2m) antenna. Mast diameters up to 3.5”OD and mast height 1’ max. for most installations.

Wall mount with 23” offset (wall to center of mast). Handles a 10’(3m) antenna. Mast diameters up to 6.62”OD and mast height 3’ max. for most installations.

Wall mount with 36” offset (wall to center of mast). Handles a 10’(3m) antenna. Mast diameters up to 6.62”OD and mast height 3’ max. for most installations.

Wall mount with 48” offset (wall to center of mast). Handles a 10’(3m) antenna. Mast diameters up to 6.62”OD and mast height 3’ max. for most installations.

Wall mount with 60” offset (wall to center of mast). Handles a 10’(3m) antenna. Mast diameters up to 6.62”OD and mast height 3’ max. for most installations.

Heavy duty wall mount with 60” offset (wall to center of mast). Handles a 10’(3m) antenna. Mast diameters up to 6.62”OD and mast height 3’ max. for most installations. Extra rigid mount for steerable and/or Ku-band.

Standard penetrating foot option

Roof, slab penetrating mount.

1/8” rubber matt recommended for use between the ballast trays and roof. Offers roof protections and an increased friction coefficient.

available for most Baird mounts. Fits between mast and base, provides for approx. 6 degrees adjustment. Factory installation highly recommended.